Commands

[ Home ] [ Up ]

 

Commands below can be found on the WebLink Log On / Log Off page:

COMMAND DESCRIPTION HOW TO EXECUTE
Log ON Logs on user to WebLink
  1. Enter User Name
  2. Enter Password
  3. Press the Log ON button
Log OFF Logs off user from WebLink
  1. Press the Log OFF button
Reset Resets the User Name and Password entry fields.
  1. Press the Reset button.
View Log Spawns MCEV and loads WebLink event log file.
  1. Press the View Log button
Enable Enables WebLink activities
  1. Press the Enable button
  2. Press OK to confirm
Disable Disables WebLink activities
  1. Press the Disable button
  2. Press OK to confirm

 

Commands below can be found on the WebLink Configuration page - NTMC Objects section:

COMMAND DESCRIPTION HOW TO EXECUTE
Add Adds new NTMC object to WebLink database
  1. Press the Add button
  2. Select NTMC component
  3. Complete object definition using the pull-down lists as they become available. Object definition is complete once the Select button becomes available
  4. If the object is to be published on the internet check the Published on Internet checkbox
  5. If the object is to be visible to its owners only, set the OAO parameter to Yes
  6. If the object is to generate e-mail whenever the object goes into ALARM state, set the E-Mail parameter to OnAlarm. If the object is to generate e-mail whenever the object changes value, set the E-Mail parameter to OnValue. 
  7. Press the Select button
Edit Edits an existing object data already in WebLink database.
  1. Select (click on) an object in NTMC Objects list
  2. Press the Edit button
  3. Modify object definition as needed using the pull-down lists as they become available. Object definition is complete once the Select button becomes available
  4. If the object is to be published on the internet check the Published on Internet field
  5. If the object is to be visible to its owners only, set the OAO parameter to Yes
  6. If the object is to generate e-mail whenever the object goes into ALARM state, set the E-Mail parameter to OnAlarm. If the object is to generate e-mail whenever the object changes value, set the E-Mail parameter to OnValue. 
  7. Press the Select button
Delete Deletes selected object from WebLink database. 
  1. Select (click on) an object in NTMC Objects list
  2. Press the Delete button
  3. Press OK to confirm.
Server Password Changes the password WebLink uses to talk to WebLinkService on the server.
  1. Press the Server Password button
  2. Press OK to continue.
  3. Enter the new password, and press OK
  4. Re-enter the new password and press OK.
 

E-Mail Management commands below can be found on the WebLink Configuration page - Users section:

COMMAND DESCRIPTION HOW TO EXECUTE
E-Mail Recipient Makes selected user an e-mail recipient.
  1. Select (click on) a user in the Users list
  2. Check the E-Mail Recipient checkbox to make above user an e-mail recipient, otherwise clear the checkbox. 
Add Adds a new e-mail address to selected user's address list.
  1. Select (click on) a user in the Users list
  2. Click on the Add button 
  3. Enter the new e-mail address
  4. Press OK
Edit Modifies selected e-mail address. 
  1. Select (click on) a user in the Users list
  2. Select (click on) the e-mail address to be modified
  3. Click on the Edit button
  4. Edit the e-mail address
  5. Press OK
Delete Deletes selected e-mail address from user database.
  1. Select (click on) a user in the Users list
  2. Select (click on) the e-mail address to be deleted
  3. Click on the Delete button
  4. Press OK to confirm
 

 

        [ Contact Us]  [Terms of Service]  [Privacy Statement]  [Customer References]  [Top of Page]

This web site developed and managed by BTE Corporation.
 Copyright © 1998 - 2012, BTE Corporation, All Rights Reserved
Equal Employment Opportunity Statement